Paint spray gun with gravity feed cup, 100 ml

Yes, the gun is well suited for glazing window frames or similar components. The small cup allows precise work on details and edges.

The paint spray gun is designed for conventional and water-thinnable paint systems with fine atomization. You should thin thicker acrylic paints before use according to the manufacturer's instructions to avoid clogging and achieve an optimal spray result.

Yes, for smaller paint repairs on the garden fence, the gun is suitable as a spray gun for wood stain. The 100 ml cup is usually sufficient for such spot work, but requires refills if necessary.

To avoid clogging and damage, immediate and thorough cleaning after each use is essential. Uncleaned residues can affect the function.

The material quantity regulation on the WF-928634 is infinitely adjustable and easily accessible in the ergonomic housing. It is intuitive to use, so even beginners quickly get a feel for the right setting.

The WF-928634 is ideal for repairs and repainting. It is well-suited for small touch-ups and partial car paint jobs, especially with conventional or water-thinnable paint systems.

The 100 ml cup of the WF-928634 is sufficient for smaller surfaces like chairs or side tables, but may require several fillings depending on the size and number of coats. For larger pieces of furniture, you would have to refill more often. (Roughly: A chair needs about 30–50 ml of paint per coat.)

The WF-928634 is well suited for precise repairs, even on small rust spots. Make sure that the paint used has a suitable viscosity for the gun.

For operating this smaller paint spray gun, a hobby compressor is often sufficient. A stable working pressure and sufficient air output are important for an even spray pattern.

Orange peel often occurs due to an unsuitable material viscosity, incorrect spray distance, or too high/low pressure. It's best to adjust these parameters on a test surface.

Yes, the paint spray gun is very suitable for staining wooden figures and other filigree wooden objects. The 100 ml cup supports working on smaller details.

Yes, the WF-928634 is very suitable for applying clear coat due to its fine paint atomization and precise air caps. You will achieve a smooth and even surface with it.

The paint spray gun is designed for glazes. When using solvent-based materials, it is important to check compatibility and clean the gun thoroughly after use.

For good spraying results, the appropriate air pressure is crucial. This depends on the material used and the desired surface quality. Start with the recommendations of the material manufacturer and adjust the pressure if necessary.

The coverage of the 100 ml fill depends heavily on the viscosity of the material and the layer thickness. For thin wood glazes, the cup is sufficient for about 0.5 to 1 m² per layer, depending on the application.

For a large door, the 100 ml flow cup is rather small and would require very frequent refilling. The gun is ideal for repainting or repairing smaller to medium-sized areas. For a whole door, we recommend a device with a larger container.

The paint spray gun with a 100 ml flow cup is ideal for precise work on smaller surfaces and details. It is excellent for touch-ups, model making, and especially for wood stains.

Yes, the WF-928634 can handle both solvent-based and water-based glazes and paints. Always pay attention to the cleaning instructions of the respective paint manufacturer.

The WF-928634 with its 100 ml flow cup is well-suited for detailed and smaller painting jobs, such as staining decorative parts. Careful adjustment and dilution of the material support a precise result.

After each use, you should thoroughly clean the spray gun with the appropriate thinner. To do this, disassemble the nozzle head and the cup to carefully rinse out all the paint channels.