Titanium-coated saw chain for 45 cm guide bar

To check compatibility, please compare the pitch (3/8" P), the drive link thickness (1.3 mm) and the number of drive links (62) of the chain with your Einhell saw.

For sawing firewood in the garden, the "Titan" chain is a very good choice. Its universal suitability and robustness cover most requirements in the private sector.

The "Titan" chain is very well suited for spruce and birch. Its robust construction and hardened cutting teeth offer a long service life with these types of wood.

Yes, the "Titan" saw chain is sharpened at the factory and is ready for immediate use. You can mount the chain directly and start sawing.

The "Titan" chain is suitable for 45 cm bars with a 3/8" P (Picco) pitch, 1.3 mm drive link thickness and 62 drive links. Please check the specifications of your saw.

Yes, the 'Titan' chain is listed in the product category "Electric Chainsaw", which indicates primary use in electric saws.

With normal use and softer wood, you should check the chain about every 2-3 operating hours and sharpen it if necessary. Hardwoods or dirt require more frequent sharpening intervals (roughly: every 30-45 minutes when sawing hardwood).

The 'Titan' chain is listed in the product category "Electric Chainsaw". This indicates primary use with electric chainsaws.

Yes, the tooth spacing, also called pitch, is a constant .325" on the "Titan" chain. This is crucial for precise guidance and cutting performance on the bar.

Information on the sharpness of the 'Titan' chain upon delivery is not included in the current product description. It is always recommended to check the sharpness before the first use.

The exact pitch of the 'Titan' chain is not specified in the product description. Please compare the required information of your saw to ensure a proper fit.

No, the "Titan" chain is very suitable for versatile use in the garden and for firewood work. Its robustness and good cutting performance also offer advantages to occasional users.

The suitability of the 'Titan' saw chain for particularly fine and clean cuts depends on the chain type (e.g. full or semi-chisel). Details on the cutting properties are noted in the product description.

The 'Titan' saw chain is designed for safe use and good handling. Information about special kickback protection features or reduced vibration can be found in the detailed product description.

The 'Titan' saw chain is designed for universal use. With resinous wood, regular cleaning and correct lubrication are crucial to prevent sticking and maintain optimal performance.

The "Titan" chain is made of robust steel and is designed for a long service life. Regular cleaning, sharpening, and correct chain tension are crucial for its durability during daily use.

The "Titan" chain is designed as a semi-chisel chain. This tooth type offers good cutting performance with reduced kickback risk and is therefore versatile in use.

The "Titan" saw chain for 45 cm bars is specially designed for a drive link thickness of 1.3 mm (.050"). Please check the information on your bar to determine the correct thickness.

The "Titan" chain has a low-kickback design that minimizes kickback. This significantly increases work safety, especially for less experienced users.

The efficiency of pruning work depends on the tooth geometry of the chain. Information on the intended use and the optimal areas of application of the 'Titan' saw chain can be found in the product description.

Details on the suitability of the 'Titan' chain for specific wood types such as hard oak trunks are not detailed in the product description. Performance depends heavily on the chainsaw.

The "Titan" chain is made of high-quality steel and offers good corrosion resistance. Nevertheless, regular care with chain oil is important, especially during longer storage or humidity.

The 'Titan' chain is intended for 45 cm swords. However, compatibility also depends on other parameters such as pitch and drive link thickness, which are missing from the description.

The product description of the 'Titan' chain (WF-934641) only specifies the bar length of 45 cm. Details on the pitch, drive link thickness or the exact number of drive links are not listed there. Please compare these values with your old chain or the information on the bar of your saw.

Cleaning the 'Titan' saw chain after each use, especially with resinous wood or intensive use, is generally recommended. This maintains cutting performance and extends the chain's lifespan.

The "Titan" saw chain is designed for 45 cm bars with a .325" pitch. Please also check the drive link thickness and the number of drive links on your saw for optimal fit.

The name 'Titan' is a product designation. Specific material properties or information on the special robustness of the saw chain are not listed in the product description.

The 'Titan' saw chain is explicitly designed for saw swords with a length of 45 cm. This chain is not suitable for 40 cm swords.

Regular and sufficient lubrication is essential for the optimal function and service life of the 'Titan' saw chain. The exact recommendations for lubrication intervals depend on your saw and its use and can be found in its operating instructions.

Yes, the "Titan" chain can also be used for wet wood. Note that wet wood wears down the chain faster and may require more frequent sharpening.