Dirty water submersible pump "STPK1100", 1100 watts

Yes, the extra copper winding ensures particularly long running times and high load capacity. The STPK1100 is designed for demanding tasks and long-term use.

Yes, the powerful STPK1100 can efficiently transport dirty water with sediments and solids up to 35 mm in size. It is designed for such demanding tasks.

The STPK1100 is designed for solids up to a size of 35 mm. Larger particles should be removed before pumping.

The dimensions of the pump are 170 mm in length, 158 mm in width and 360 mm in height. Please also consider the necessary space for the float switch.

Yes, as a submersible pump for dirty water, it is well-suited for brackish water and liquids with solids up to 35 mm. The stainless steel housing is particularly advantageous here.

The pump reliably processes solids up to 35 mm in size, which also includes very fine sand and mud. Its solid design is designed for such applications.

With a flow rate of up to 19,000 liters per hour, the pump can pump out 15,000 liters of water in less than an hour. This corresponds to roughly 45-50 minutes.

The stainless steel housing of the pump is robust and resistant, which allows permanent use even with more demanding types of dirty water.

The pump is suitable for solids up to 35 mm in size. Leaves and small branches within this range can be handled by the STPK1100 without any problems.

No, a check valve is not included in the scope of delivery of the STPK1100 submersible waste water pump. The device is designed for automatic operation with a float switch that switches off when the water level drops.

The pump housing is made of robust stainless steel, which makes it very resistant to mechanical stress and impacts.

The pump is powerful with 1100 watts and solidly built. This allows for efficient pumping even with larger amounts of water.

Yes, the pump is specially designed for dirty water and can handle solids up to 35 mm in diameter. Its stainless steel housing ensures corrosion resistance in such environments.

The STPK1100 is a submersible waste water pump and is explicitly designed for pumping water with solid particles up to 35 mm. It is not only intended for clear water.

The pump is designed for dirty water with solids up to a size of 35 mm. However, fibrous residues or long plant remains can potentially lead to clogging if they exceed the maximum particle size or become entangled.

The float switch is designed to automatically switch off the pump at low water levels. This protects the pump from dry running.

The appropriate hose is not included in the scope of delivery of the pump and must be ordered separately. The STPK1100 is only supplied with the pump itself.

Yes, the STPK1100 is designed for water temperatures up to a maximum of 35 °C. Use at 30 °C is therefore safe.

The pump has a 10-meter cable. This should be sufficient for most applications to reach an outlet nearby.

The pump requires a minimum immersion depth of 115 mm to work reliably. Complete submersion is not mandatory, provided the float can move freely.

Yes, the pump is suitable for solids up to 35 mm (3.5 cm). Leaves and branches of this size will therefore be conveyed without any problems.

The pump offers a maximum head of 8 meters. A 5-meter deep shaft and a slight incline on the slope can be managed without any problems.

The STPK1100 is powerful and solidly built, and also equipped with a copper winding. This suggests it is well-suited for extended use.

The pump is made of robust stainless steel and equipped with an extra copper winding for durability. It is designed for permanent use underwater, as long as the maximum water temperature of 35 °C is not exceeded.

Yes, the STPK1100 is equipped with a float switch that automatically turns it on when the water level rises. So it starts pumping on its own.

The pump can handle solids up to a size of 35 mm. Larger objects such as branches or stones that exceed these dimensions can clog or damage the pump.

Thanks to its high stability, the pump can also be safely set up in shafts with uneven floors. The solid design ensures stable operation.

Yes, as a submersible pump, it is designed for permanent use underwater. The robust stainless steel housing reliably protects the inner components from moisture.

No, the pump housing is made of robust stainless steel, which reliably protects it from rust and ensures a long service life.

Yes, the STPK1100 is designed for wastewater with mud and small stones up to 35 mm particle size. Its power supports the efficient pumping of such media.