Front pump VP1

The pump requires a drill with at least 900 watts of power, a geared chuck, and a 43 mm Euro neck. Many cordless screwdrivers do not achieve this power.

Yes, the VP1 is ideal for this. It can handle dirty water with small stones and achieves a flow rate of up to 3000 liters per hour.

The VP1 reaches a maximum pressure of 10 bar (145 PSI). This value is more than sufficient for most bicycle tires.

Yes, the VP1 is compatible with car valves and reaches the necessary pressure for common scooter tires.

Please check the correct and tight fit of the pump head on the valve. Make sure there are no contaminants or leaks in the hose system or on the piston.

Information on the folding function of the VP1 is not included in the current product description. The design is optimized for a stable base for use.

The pump head of the VP1 is designed for easy and quick connection and disconnection from the valve. A light lever mechanism allows for effortless detachment.

The VP1 is suitable for inflating a variety of tires, including stroller tires. Always pay attention to the recommended maximum pressure of the tire to avoid damage.

For a long service life of the VP1, regular cleaning and dry storage are recommended. Specific maintenance intervals are not listed in the product description.

The handle of the VP1 is designed for comfortable operation. Its shape generally allows for a good grip and effective use, even with common work gloves.

Information on the availability of spare parts such as hoses for the VP1 is not listed in the current product description. Please contact our customer service for details.

The VP1 is suitable for all common bicycle tires, regardless of the width. The maximum pressure of 10 bar also covers the needs of e-bike tires.

Yes, the VP1 is compatible with Dunlop valves (DV), which are often used on Dutch bikes. Suitable adapters are included to cover different valve types.

General recommendations for pumps of this type are to check the seals and the pump piston for wear. Unfortunately, specific information for the VP1 is not included in the product description.

The exact length of the hose is not specified in the product description. The hose length is usually sufficient for conveniently reaching car valves on the ground.

Yes, the pump is designed to pump dirty water including small stones without damage. That's a big advantage of the VP1.

Yes, the VP1 displays the existing tire pressure immediately after connection. So you can check the actual value directly before you start pumping.

The pump head of the VP1 is universally designed for all common valve types such as Schrader, Presta and Dunlop valves. A direct connection is possible.

The VP1 is primarily designed for bicycle tires and smaller applications. Inflating car tires generally requires more force and volume, for this we recommend compressors instead. For bicycles, however, the VP1 is very user-friendly and easy to operate with moderate effort.

The pressure gauge of the VP1 is designed for pressures up to 10 bar (145 PSI) and offers good readability. It helps you to reliably achieve the desired pressure.

For correct function, the drill must be used in accordance with the manufacturer's specifications for the pump. Make sure the drill is running in the correct direction of rotation for the pump's performance.

The pump head of the VP1 is designed for a quick and secure closure. When removing, only a minimal air pressure is lost, which does not affect the tire pressure.

The VP1 is primarily intended for use under normal conditions and should not be permanently exposed to the weather. For a long service life, dry storage is recommended.

The VP1 is designed to stand stably on a firm surface. On uneven surfaces, care should be taken to position it securely to avoid tipping.

The VP1 is directly compatible with car valves (Schrader valves). No separate adapter is needed.

The VP1 is primarily designed for inflating tires. An integrated bleed function is not listed in the product description. However, manual bleeding via the valve is always possible.

The pumping time depends heavily on the tire volume and the desired pressure. The VP1 is powerful, but for typical mountain bike tires you will need a few pump strokes.

The VP1 has a ¾ inch connection thread and is also compatible with the Gardena system. A hose connection with ¾ inch is included.

The VP1 has a wide, stable base that ensures a secure hold even with vigorous pumping and prevents tipping over.

Absolutely. The VP1 is explicitly designed for dirty water with small stones and will not be damaged. Pumping out garden ponds is therefore possible without any problems.