Resin remover pump sprayer, 750 ml

The resin remover is biodegradable. Nevertheless, direct contact with plants and the soil should be avoided as far as possible in order to protect them.

Due to the foaming action, the resin remover is extremely economical. The exact number depends on the degree of soiling, but the 750 ml pump spray is sufficient for many applications and a typical workshop setup.

Due to the foaming effect, the resin remover is extremely economical. A precise area specification is difficult, as it depends heavily on the type and amount of soiling. However, the product is ideal for the regular maintenance of your resin-covered tools and equipment.

Yes, the resin remover is explicitly designed to effectively dissolve even burnt-on resin residue. The foaming action supports the deep-cleaning effect.

Yes, the resin remover is suitable for painted metal surfaces and does not attack them. Spray the product on, let it work for a short time and then wipe it off.

No, the resin remover is formulated so that it leaves no streaks after application and wiping. The surface remains clean and shiny.

Yes, the resin remover is specially designed not to damage sensitive surfaces like painted wood. It leaves cleanliness and shine.

The resin remover pump spray is specially designed for cleaning resin-coated tools such as saw blades, planes and chisels. Application on skin or clothing is not intended and is not recommended by us.

The resin remover WF-942802 is primarily designed for resinous tools such as saw blades, planes and chisels. For plastic-coated parts, we recommend testing the product in an inconspicuous area first, as material compatibility can vary depending on the plastic.

The resin remover is specially designed for removing plant resin residues on tools. It is not intended for synthetic resins such as epoxy resin.

The product description does not give specific instructions for exhaust. In general, sufficient ventilation is recommended when using cleaning agents in enclosed spaces.

The product description does not contain any specific information on storage temperature. It is common to store chemical products frost-free to maintain effectiveness.

The resin remover is specifically designed to dissolve resin residue. For oil or grease residue, special degreasers are usually more effective.

The resin remover effectively dissolves even burnt-in resin residues. Thanks to the foaming action, the application is easy: spray on, let it work, and then wipe off. Intensive scrubbing is usually not necessary.

The resin remover was primarily developed for metal tools such as saw blades and planers. Compatibility with plastics cannot be generally guaranteed, a test in an inconspicuous place is recommended.

The resin remover works by spraying it on and letting it work. Afterwards, the dissolved resin residues can be easily wiped off, strong scrubbing is usually not necessary.

Yes, the pump sprayer is robust and reusable. This contributes to sustainability and extends the life of the bottle.

Yes, the 360° spray function allows application from any position, even overhead. This makes cleaning hard-to-reach places much easier.

After spraying, the resin remover should be allowed to work briefly. The exact exposure time depends on the degree of resinification, but is usually shortly before wiping.

The resin solvent is PTFE and silicone-free. It is intended for cleaning tools such as saw blades, a prior test on a small, inconspicuous area is recommended for special coatings.