Replacement battery 12 Volt Li-Ion

No, thanks to lithium-ion technology, this battery has no memory effect. It delivers the full capacity with every charge.

The battery is primarily designed as a perfect complement to the "Shark" reciprocating saw. Compatibility with other 12V devices must be checked individually, as the pin assignment and design can vary.

That's right, the lithium-ion technology of this battery prevents the memory effect. You can charge the battery at any time, regardless of the current charge status, without affecting the capacity or lifespan.

The 2 Ah battery is designed for longer work sessions. For continuous use on a construction site, we recommend having several batteries available and using them alternately, as the charging time is only 1-1.5 hours.

This battery is specially developed for the reciprocating saw No. 945355. Compatibility with other Westfalia 12V tools is not explicitly stated in the product description.

The battery has built-in protection against overcharging. However, for optimal durability, it is recommended to remove the battery from the charger when not in use and to pay attention to storage at 50% charge.

Yes, the battery is fully charged in 1 to 1.5 hours. With two batteries, you can work without interruption, as one is charging while the other is in use.

Yes, the charging time of 1 to 1.5 hours allows for a seamless change. While one battery is working in the saw, the other can be fully charged, so you can saw continuously.

Extreme temperatures below 0 °C should be avoided as they can affect battery performance and life. It is best to work at moderate temperatures.

Yes, the battery provides enough power for working on metal and supports high precision. The device is therefore also suitable for numerous smaller cuts in thin metal.

Yes, the reciprocating saw No. 945355, for which this battery is designed, cuts wood, plastic and metal up to 40 cm cutting depth. The battery provides the necessary stable energy for this.

Yes, the battery is very suitable for precision work in plastic materials, especially with the "Shark" reciprocating saw. The 2 Ah capacity provides enough energy for this.

The battery offers a capacity of 2 Ah for sufficient energy and enables longer work sessions. A premature decrease in performance due to difficult operating conditions is not to be expected as long as the battery is sufficiently charged.

Yes, before the first use, the battery should be fully charged to ensure full capacity. This is a standard recommendation for lithium-ion batteries.

The number of cuts depends heavily on the material and the cutting depth. With 2 Ah, however, you can make a good number of precision cuts in wood or metal. (Roughly speaking: With moderate load, the battery can last for about 20-30 minutes of operation in a reciprocating saw.)

If the battery is completely discharged, fast charging takes only 1 to 1.5 hours until it is ready to use again.

Yes, the battery is designed for longer work sessions without interruption and offers sufficient energy with 2 Ah. A rapid drop in performance during operation is not typical for this Li-Ion battery.

The 2 Ah battery enables longer work sessions, even with demanding materials like wooden beams. For continuous work without interruption, a second battery is recommended.

Yes, the spare battery is exactly for uninterrupted use with the reciprocating saw No. 945355. While one battery is used in the device, the other can be fully charged in 1 to 1.5 hours. Roughly speaking, you can work continuously with alternating use.

The battery has a low self-discharge and holds the charge for a long time. However, for best durability, it is recommended to check the charge level during prolonged storage (over 1 month) and, if necessary, bring it to about 50%. Ideally, store it at 15-25 °C.

The 2 Ah battery allows for longer work sessions. The exact running time depends heavily on the material and load, but for typical applications with the "Shark" saw, you can expect around 15-25 minutes of continuous use. (Roughly: With moderate load, the 2 Ah capacity is sufficient for about 10-20 cuts in medium-strength wood.)

Yes, the battery with 2 Ah offers enough power for the "Shark" reciprocating saw. For a normal worktop, the capacity should be sufficient, depending on the thickness and type of wood.

The specified charging time of 1-1.5 hours refers to a fully discharged battery. With a partially discharged battery, the charging time is shortened accordingly.

The 12 Volt battery offers enough power for precision work in wood, including thicker materials. The performance is tailored to demanding applications with the "Shark" reciprocating saw.

The fast charging time of 1-1.5 hours is achieved with a suitable charger. Information on compatibility with other 12V chargers is not included in the product description.

This replacement battery is intended as a perfect complement to the "Shark" reciprocating saw. Whether it is compatible with other devices in Westfalia's 12V product line cannot be determined from the current product description.

Yes, the battery is a perfect addition to the "Shark" reciprocating saw and supports working on plastic materials with high precision. PVC pipes can also be processed with it.

Yes, the battery has built-in protection against overcharging and deep discharge. This contributes to the safety and longevity of the battery.

The 2 Ah capacity is designed for efficient cuts in metal pipes. The actual runtime depends on the material thickness and cutting intensity, but is suitable for longer operations.

For best durability, the battery should be stored at 15-25 °C and a charge level of approx. 50%. It is also advisable to avoid extreme temperatures below 0 °C.