Power Safe Light mobile lamp

Yes, the light has a special flashing mode. This is suitable for use as a warning light in the event of a breakdown or in emergencies.

The battery life of the Power Safe Light mobile varies depending on the selected brightness level and the ambient temperature. At full brightness, the running time is between 1.5 and 3 hours, at lower brightness accordingly longer.

At 100% brightness, the battery of the WF-945455 lasts about 3 hours. That's sufficient for most short-term jobs.

To change the battery, first carefully unscrew the reflector of the lamp. Then you can open the battery holder and pull out the old battery to replace it with a new one.

Yes, the Safe Light has an integrated USB output (5V/1A). You can charge smaller mobile devices with it.

Yes, with a maximum light output of 1000 lumens, the lamp offers very good illumination. For detailed work, you can adjust the brightness as needed. (Roughly speaking: This corresponds to the brightness of a conventional 75-watt light bulb).

Yes, the Power Safe Light mobile can also be operated with a completely discharged battery, provided it is connected to a suitable charger. However, the performance is limited in this operating state.

For the Power Safe Light mobile, you need a charger that provides an output power of 5 volts and at least 500 mA. A standard USB power supply, as is often used for smartphones, is suitable for this purpose.

The integrated Li-Ion battery of the WF-945455 is fully charged again with the included 230V power supply in about 4 hours.

The Power Safe Light mobile is equipped with a standard 1/4" tripod thread on the underside. It therefore fits on most camera tripods.

The lamp has a USB-A output (5V/1A) for charging external devices. For tablets with a USB-C port, a suitable cable (USB-A to USB-C) is required, the charging speed may vary depending on the tablet.

With 300 lumens of brightness and a color temperature of 6500K, the lamp provides bright, clear light and optimal visibility. This is sufficient to find items even in dark corners like a tool cabinet.

Yes, the light is splash-proof according to IP44. Light drizzle is not a problem for the device, but it should not stand in the rain permanently.

Yes, the Safe Light is protected against splash water and dust with protection class IP44. This makes it ideal for outdoor applications such as the garden or carport.

The Safe Light is splash-proof according to IP44. This means it can withstand rain and splashes, but should not be submerged in a puddle.

Yes, the lamp is equipped with a robust ABS housing and a protective rubber coating. This increases the resistance to impacts and falls.

Yes, the Safe Light has an integrated magnetic base. With it, it can be securely attached to metallic surfaces such as a hood.

Yes, the lamp has a charge status indicator with four LEDs. In addition, a red LED flashes to warn of a low battery level.

You can safely stand the Safe Light thanks to the continuously adjustable stand. Alternatively, it can also be hung up via the integrated hook.

The battery of the Power Safe Light mobile does not need to be drained before the first use. You can charge the device directly after unpacking until the battery is fully charged.

Yes, the installation of the Power Safe Light Mobile is flexibly possible. In addition to screwing, you can also securely glue the lamp.

Unfortunately, the product description of the Power Safe Light mobile does not contain any specific information about the type of light cone (wide or pinpoint).

The warning flash function with red/blue flashing light is designed for good visibility. It is perceived as a noticeable signal even in daylight.

The lamp is powered by 3 x AAA Micro batteries, which are not included. These batteries are standard and available in most stores.

Yes, the battery life of the Power Safe Light mobile can be affected by low temperatures in winter. Cold ambient conditions can reduce the battery's performance and shorten the lighting duration.

The Power Safe Light Mobile is compact and lightweight, but can also be set up. For permanent and secure attachment, we recommend screwing or gluing it.

With a weight of about 650 g, the Power Safe Light mobile is relatively light and handy. It can also be carried comfortably for a long time.

The lamp is charged via a standard USB-C cable. A suitable cable is included, but you can also use a common phone cable.

The motion sensor of the lamp automatically detects movements and turns on the light. An explicit day/night detection is not listed in the description, therefore the lamp is activated by movement, regardless of the ambient brightness.

Yes, at the lowest brightness level (25%) the lamp achieves a battery life of up to 12 hours. That's easily enough for a whole night.