Saw chain with titanium coating, 40 cm

The titanium coating of the saw chain reduces friction during sawing. This can help the chain work more efficiently with resinous wood and gum up less quickly than conventional chains. Regular cleaning of the chain, however, remains recommended.

The titanium coating of this chain is designed to extend the service life. How quickly the chain dulls depends heavily on the type of wood, the sawing pressure, and consistent lubrication.

No, the titanium coating does not significantly affect sharpening. You can sharpen the chain with the usual sharpening tools for saw chains. Pay attention to the correct sharpening angle.

The titanium coating primarily contributes to hardness and cutting durability, not directly to the tensile strength of the base material. Some stretching as a wear part is normal for saw chains, regardless of the coating.

To protect the lifespan and the coating, you should free the chain from sawdust after use and wipe it with a cloth. Then store it in a dry, dust-free place.

This 40 cm chain is generally designed for sawing wood. The efficiency in fresh spruce wood depends heavily on the motor power of your electric chainsaw and the correct sharpening.

The titanium coating contributes to an extended lifespan, but the exact durability depends heavily on usage. A new chain is due when it no longer cuts efficiently even after sharpening or shows significant damage.

The titanium coating increases the chain's resistance to wear, even with hardwood. With frequent use in hardwood, wear can still be faster than with softwood, but the coating noticeably delays this.

The titanium coating of the chain is primarily designed to increase durability and cutting performance. A direct reduction of the kickback risk is not the main function of this coating. Always pay attention to the correct sawing technique and the safety instructions recommended by the saw manufacturer to avoid kickback.

Yes, this chain is also suitable in principle for cordless chainsaws with a bar length of 40 cm. Also pay attention to the correct specifications for pitch and drive link thickness.

The chain with titanium coating is designed for regular use with your electric chainsaw in the garden. The coating supports an increased lifespan of the chain.

The saw chain with titanium coating is designed for a bar length of 40 cm and has a pitch of 3/8" LP and a drive link thickness of 1.3 mm. It has 57 drive links. Please check the specifications of your saw for an exact fit.

The titanium coating increases the wear resistance of the chain, which can in principle lead to less stretching over the service life. Nevertheless, regular inspection and, if necessary, retensioning of the chain is essential for optimal performance and safety. This minimizes wear and keeps the chain ready for use.

The integrated antikickback function is a safety feature that minimizes the kickback of the chainsaw upon contact with the wood. This significantly increases safety when working and ensures more stable guidance.

To ensure accuracy, please compare the technical data of your old saw chain (pitch, drive link thickness, number of drive links) with the required specifications for this 40 cm chain.

Yes, this chain is designed for chainsaws with a 40 cm bar length, 57 drive links and a 3/8" LP-050-57DL pitch. It is ideal as a replacement for suitable saws.

The chain with a length of 40 cm and titanium coating is ideal for both occasional and regular sawing work within the scope of your electric chainsaw.

The required specifications such as pitch, drive links and groove width can usually be found on the bar of your chainsaw or in its operating manual. You should compare these with the details of the WF-945761.

Yes, the saw chain is specially developed for chainsaws with a 40 cm bar length. It also fits our cordless chainsaw Art. 981553 GMAK 36/40 and thus generally for cordless chainsaws with the appropriate specifications.

Yes, the titanium coating of the chain improves the surface hardness and significantly reduces friction. This leads to a more stable cutting performance and can make the cut pattern more precise. The smoothness can also be positively influenced by the lower friction.

This chain is primarily categorized for electric chainsaws. For use on a cordless saw with a 40 cm bar, you would need to compare the exact specifications (pitch, drive link thickness and number) of your saw.

A worn titanium coating manifests itself through faster wear of the cutting teeth and reduced cutting performance. The chain then noticeably becomes duller faster and requires more frequent sharpening.

The titanium coating ensures a higher cutting performance and thus enables cleaner cuts even in fresh wood. For very precise woodworking, however, it also depends on the sharpness and guidance of the saw.

In general, contact with soil, sand and roots is extremely abrasive and leads to very rapid wear on any saw chain. The titanium coating also does not protect against increased abrasion under such conditions.

It's best to clean the chain with a brush and a suitable cleaner or kerosene to remove resin and wood residue. Then the chain should be dried and lightly oiled to prevent corrosion.

This 40 cm chain is intended for common electric chainsaws. For pruning saws, special chain specifications (e.g. smaller pitch) are often necessary; please check the specifications of your saw.

The exact number of drive links for the WF-945761 is listed on the product page. Please be sure to compare this number with that of your old chain, as this is crucial for the fit.

Yes, the titanium coating ensures improved gliding ability and makes cutting wood up to 20% faster than with standard chains. You benefit from reduced effort and more efficient work.

Yes, this chain is suitable for guide bars with a sprocket. It is important that all other specifications such as pitch and drive link thickness match.

Yes, the saw chain can generally be sharpened. Use a suitable round file with the correct file diameter for this.