Surface cleaner X-Brush, 1020 watts

The X-Brush II effectively removes moss and stubborn deposits. For optimal cleaning results with particularly heavy soiling, such as very moss-covered paths, it is recommended to pre-treat the surface with a special cleaner.

The split shaft of the X-Brush allows for easy storage and uncomplicated transport. With its dimensions of 1475 x 370 x 180 mm when assembled (even more compact when disassembled), it fits well in a trunk.

The robust coarse dirt brush of the X-Brush with its special profile is effective against moss, algae and ingrained dirt. For particularly stubborn stains such as old oil stains, the result may vary.

The X-Brush is explicitly suitable for artificial turf and cleans gently. Thanks to the special brush profile and the variable speed, you raise the grass and free it from dirt without damaging the fibers.

The surface cleaner weighs 5.89 kg. The continuously height-adjustable aluminum handle (140 to 150 cm) is ergonomically designed and prevents back pain, which enables comfortable and effective work even for older users.

That's correct. Unlike working with a pressure washer, you don't get yourself and the surroundings of your cleaning surfaces dirty when using the X-Brush II.

The product description of the X-Brush contains no information on compatibility with long poles or suitability for vertical facade surfaces. It is primarily designed for surface cleaning.

The X-Brush surface cleaner has a robust coarse dirt brush and a powerful 1020 watt motor. This reliably removes moss and other stubborn deposits from your paving stones.

After use, you should simply clean and dry the brushes. Yes, additional cleaning brushes for special applications are optionally available from us to achieve optimal results on different surfaces.

We do not have information on the exact weight, but the X-Brush is designed for comfortable handling when cleaning surfaces. The 1020 watt motor provides power without unnecessarily complicating the handling.

The X-Brush with its robust coarse dirt brush and 1020 watt motor offers significantly higher efficiency and cleaning performance than a hand broom, especially for stubborn dirt in patio joints.

The X-Brush is primarily designed for removing coarse dirt and deposits on outdoor surfaces. For sensitive tile joints indoors, the robust brush could be too abrasive and we recommend caution.

The robust coarse dirt brush and the powerful 1020 watt motor are designed for removing coarse dirt on almost any surface. Suitability for chewing gum residue is not specifically stated.

The powerful 1020 Watt motor and the robust coarse dirt brush of the X-Brush are designed for effective surface cleaning. We do not have information on suitability for permanent, commercial use.

The continuously adjustable speed control (800 – 1300 rpm) is intended for both different surface materials and different degrees of soiling. This allows you to adapt the device individually to achieve optimal cleaning results.

With its powerful 1020 watt motor, the X-Brush is designed for thorough cleaning of even large and heavily soiled areas. The robust coarse dirt brush effectively supports this.

The supplied 26 cm wide coarse dirt brush is designed for universal cleaning. For special applications such as narrower joints or hard-to-reach corners, additional cleaning brushes are optionally available.

Yes, the X-Brush II was specially developed for cleaning and care of various wooden floors. Thanks to the special brush profile, it works more gently than conventional electric brushes and also cleans effectively in grooves without damaging the surface.

Yes, the X-Brush is designed for almost any surface and can therefore also be used for cleaning concrete pool surrounds. The speed is infinitely adjustable.

Yes, the robust coarse dirt brush and the powerful 1020 watt motor of the X-Brush are especially suitable for removing stubborn deposits such as algae on paving stones.

The brush of the X-Brush II is 26 cm wide and designed for the efficient cleaning of larger areas. Smaller niches and corners may be more difficult to reach due to the brush width.

Yes, the robust coarse dirt brush with the special brush profile of the X-Brush is suitable for almost any surface. It also effectively removes dirt from uneven natural stone surfaces.

Yes, the X-Brush is designed for ergonomic work while standing. The infinitely height-adjustable aluminum handle (140-150 cm) prevents back pain and ensures comfortable, stable handling even during longer use.

The X-Brush is suitable for almost any surface and has a continuously adjustable speed control. However, the application for vertical surfaces such as garage doors is not explicitly described.

The continuously adjustable speed control allows you to adjust the brush speed to the respective surface and degree of soiling. This way, you can also use the X-Brush gently for more sensitive materials.

The motor of the X-Brush II surface cleaner has an output of 1020 watts. This power is sufficient to effectively remove old and trodden dirt such as earth and growth from natural stone slabs.

Absolutely. The X-Brush II is ideal for artificial turf: With the red coarse dirt brush, it lifts the grass surface in no time and also removes coarse dirt in the gaps.

The X-Brush II with its 1020 watt motor and robust coarse dirt brush is very suitable for removing stubborn dirt such as algae and moss from stone and paved surfaces. The variable speed can be optimally adapted to the degree of soiling.

Yes, the X-Brush surface cleaner can also be used for more sensitive surfaces such as wooden terraces thanks to the continuously adjustable speed control. Start with a lower speed and adjust it if necessary.

As an electrical device, the X-Brush should not be operated in rain or heavy wetness. This is to protect the electronics and your safety during use.