Cordless air pump ADLP18 starter set (including battery and charger)

The ADLP18 is also ideally suited for inflating car tires. You can easily adjust the tire pressure of your car tires with it.

The ADLP18 is also designed for filling tires with higher pressure, as is common in caravans or vans (e.g. 4 bar). It delivers the necessary power, even if the process may take longer at high pressure.

Yes, as soon as the ADLP18 is connected to the valve, the actual pressure is displayed on the display. This way you can always check the fill level and set the target pressure exactly.

The noise level of the pump is comparable to a standard small compressor. It is not excessively loud and is bearable for short operation.

Yes, the pump is compatible with the most common valve types. Appropriate adapters for Dunlop, Schrader and Sclaverand valves are included, as well as for balls and smaller inflatable items.

After setting the desired pressure, the pump starts the process and switches off automatically when the target value is reached. It is not necessary to hold the start button.

Yes, suitable adapters for balls and smaller inflatable items such as air mattresses are included. This allows you to use the pump in a variety of ways.

Filling a car tire from e.g. 1.8 to 2.5 bar takes a few minutes, depending on the tire size and volume. The pump is very efficient for top-ups or smaller corrections.

With a full battery charge, you can easily check the tires of several vehicles and correct the pressure. The capacity is sufficient for normal home use.