Cutting head "Easy Load"

The weight of the cutting head is 3.5 kg. With some scythes or brushcutters, this can affect the balance, which requires a short familiarization period. However, the design is designed for robust handling.

Unfortunately, details on the thread feed (manual or automatic) and the maximum thread thickness of the 'Easy Load' cutting head are not described in the product description.

The cutting head is suitable for removing thickets, tall weeds and scrub. The 2.0 mm thread and the stable plastic material ensure effective cutting performance.

The cutting head allows for convenient thread extension via automatic tip. You tap the head briefly on the ground to feed the thread while in operation.

Yes, with a broken thread, the 'Easy Load' system allows for quick refilling without disassembly. The new thread is simply inserted through the openings and wound up by turning the knob.

The 'Easy Load' system is designed for easy thread guidance. You can also insert shorter pieces of thread with a diameter of 2.0 mm. The included 2 x 2 m is a recommended standard length.

This cutting head is primarily intended for trimming lawn edges and lighter vegetation. For very thick undergrowth or woody plants, we recommend special knives or thicker threads.

The cutting head takes two separate 2-meter thread pieces. How long these last depends heavily on the use. The thread change itself is lightning fast and without tools thanks to the Easy-Load system.

The 'Easy Load' cutting head is optimized for threads with a diameter of 2.0 mm. The use of other thicknesses is not recommended and could affect the function.

Yes, the cutting head comes with suitable adapters that allow mounting on many older trimmer models. Please check the thread size of your device.

Thanks to the easy thread change and the tap automatic, the workflow is hardly interrupted. The thread capacity is sufficient for typical gardening work, so it needs to be refilled less often.

You can cut the thread yourself to a length of 2 meters, as long as it has a diameter of 2.0 mm. No special pre-made pieces are necessary.

Yes, the patented Easy-Load system enables a lightning-fast thread change without tools and dismantling the cutting head. The thread is ready for use again in seconds.

Yes, the 'Easy Load' cutting head is designed for operation with two threads. The lifespan of the threads depends heavily on the stress and the material to be processed. When trimming normal grass, they offer good performance.

Yes, the 'Easy Load' cutting head is made of sturdy plastic material and offers high durability. It is designed for intensive use in demanding environments.

The cutting head is suitable for most common grass trimmers and brushcutters. It comes with various adapters to ensure wide compatibility.

Whether the 'Easy Load' cutting head is compatible with specific older gas trimmer models is not listed in the provided product description.

The cutting head is designed to accommodate commercially available trimmer threads. The thread spool holds a standard length, which is sufficient for typical gardening tasks.

Yes, the cutting head allows for a quick and easy thread change. You don't have to disassemble the head to insert new thread. (The complete thread change is usually done in under 30 seconds.)

Information on the exact thread size and type of the 'Easy Load' cutting head is not included in the product description.

There is no information in the product description about the exact handling and difficulty of changing the thread on the 'Easy Load' cutting head for inexperienced users.

No, the 'Easy Load' system of the cutting head was developed to simplify the thread change as much as possible. The thread is simply inserted from the outside and wound up.

The weight of the cutting head of 3.5 kg can affect the total weight of your battery-powered trimmer. The balance depends heavily on the model and design of your trimmer. A slight change in weight should not greatly affect handling.

The head can be used for lighter thorn hedges or for removing blackberry shoots. However, with very dense or woody material, the 2.0 mm thread has reached its limits.

The sturdy plastic material of the cutting head is robust against light contacts. However, wear and tear can occur if it repeatedly or heavily hits solid objects such as fences.

The 'Easy Load' cutting head is made of stable plastic material and is designed for intensive use in demanding environments. It offers high resistance, even when clearing scrub and stubborn weeds.

Yes, the assembly of the cutting head is straightforward. It is simply screwed onto the M10 x 1.25 thread of your scythe or brush cutter. Complex assembly is not required.

The cutting head has a semi-automatic thread extension. The thread extends automatically by lightly tapping it on the ground during operation.