Wet grinder WNS45

Yes, the WNS45 is significantly better suited for HSS steel than a dry grinder. The permanent water cooling prevents the workpiece from overheating and thus annealing the cutting edge, which increases the tool's service life.

The WNS45 enables a very clean and fine sanding pattern. For even higher sharpness and polishing, a separately available leather honing disc or manual honing may be recommended, depending on the desired result.

The WNS45 is designed for reliable grinding tasks with a rated power of 45 W. The water cooling protects the tool blades from overheating; the motor itself is designed for continuous operation in normal grinding applications.

No, the device is not intended for outdoor operation or storage in the rain. After use, the WNS45 should be stored dry and protected.

Yes, the WNS45 has an integrated on/off switch with a clear emergency stop function. This ensures a quick and safe shutdown of the device if needed.

Yes, for the WNS45, different grinding stones with different grit sizes are available as accessories. This allows for adaptation to different materials and desired degrees of sharpness, from coarse to very fine.

The 100 grit of the corundum grinding stone is designed for fine grinding and achieving very sharp edges. For the vast majority of tools and knives, this grit is perfectly sufficient for excellent sharpness in use.

Yes, the leather honing disc is already included in the delivery of the WNS45. It is used for polishing and honing the cutting edge after wet grinding.

Yes, the WNS45 is designed for the precise sharpening of a variety of tools. In combination with suitable grinding fixtures, which are available separately, even very fine cutting edges and angles can be precisely machined.

Yes, the adjustable support of the WNS45 allows safe and precise grinding at the correct angle. This allows fine carving tools with pointed geometry or unusual angles to be sharpened exactly.

For gouges you need a special sharpening device, which is not included in the scope of delivery of the WNS45. However, with a suitable device, a gouge can be sharpened precisely.

The WNS45 is a compact wet grinder that is specially designed for use without sparks. The water cooling ensures safe operation and clean results in your workshop.

Yes, for optimal grinding results and even wear, it is advisable to dress the grinding stone of the WNS45 regularly. A suitable dressing tool for the wet grinding stone is available as an accessory.

The WNS45 operates at a significantly lower speed compared to dry grinders, which reduces the noise level. A quiet operating noise is typical for wet grinders and more pleasant during prolonged use.

Yes, the WNS45 is well suited for precisely sharpening plane irons. Use the wet grinding wheel for rough grinding and the honing wheel for deburring and polishing.

The WNS45 is equipped with a durable induction motor designed for continuous use. Wet grinding also ensures low heat generation on the tool, allowing for longer grinding work.

It is recommended to empty the water after each use and clean the container. This way you avoid deposits of grinding sludge and keep the device hygienically clean.

The WNS45 is primarily designed for sharpening steel tools, both from wood and metal. For ceramic knives, we recommend special abrasives or diamond grinding wheels, which are not included as standard.

The WNS45 is ideally suited for sharpening wood chisels sharply and precisely. Pay attention to the correct grinding angle for optimal results.

The WNS45 has a robust universal support that allows precise angle adjustment. With the included angle gauge, the desired grinding angle can be set and maintained exactly, which ensures even results.

Yes, the WNS45 has a guide rail and support rail that makes precise sharpening easy, even for beginners. The handling is simple and ensures good results on knives and other tools.

The WNS45 has a grinding stone for coarser work and a leather pull-off disc for fine removal. So you can work from basic sharpness to a razor-sharp result.

Yes, the WNS45 is very compact with dimensions of 220 x 152 x 131 mm and easy to transport. The setup is very simple: fill with water, connect the power, set the support to the desired angle and you can start immediately.

The device is equipped with a splash guard that catches most splashes. Nevertheless, it is advisable to use a base when working with a wet sander to absorb light residual moisture or grinding sludge.

The grinding stone of the WNS45 has a diameter of 100 mm and a width of 20 mm. Longer blades can be easily sharpened by guiding them over the stone in several, overlapping strokes.

The WNS45 is compactly built and takes up little space in your workshop. It can therefore be easily placed on a shelf or workbench.

For precision work, the WNS45 offers a stable work surface. For exact angle maintenance on tools like plane irons or chisels, suitable sharpening devices or protractors are recommended.

The WNS45 uses water cooling to cool the blades. The amount of water is sufficient for several grinding processes. Refill water as needed to ensure that the grinding stone is always well covered.

The WNS45 is specially designed for wet grinding. Operation without a water bath is not intended, as this can lead to overheating of the workpiece and faster wear of the grinding stone.

Yes, the WNS45 is suitable for sharpening roughing gouges and other complex turning tools. For this purpose, special grinding attachments are required, which are available separately and can be mounted on the existing universal support.