Anti-slip light strip 2-in-1, 1 piece

Yes, the tape is suitable for smooth epoxy resin coatings. The robust adhesive offers strong adhesion, and the material is resistant to chemicals and abrasion, as they occur in workshops.

No, for optimal and permanent adhesion and to avoid detachment, the tape should only be applied to flat surfaces. Slightly curved surfaces are therefore not ideal.

The rough surface of the tape provides a good anti-slip effect. This significantly increases safety, even with smooth shoe soles.

The tape is robust and abrasion-resistant, making it suitable for areas with high pedestrian traffic. The rough surface remains non-slip even with heavy use. For best durability, the surface should be clean and even.

Yes, the self-adhesive tape can also be applied to patio slabs with a fine structure. The surface should be clean, dry and free of grease beforehand.

The light strip is designed to make contours and tripping edges visible in the dark. This provides additional safety through better orientation.

The anti-slip light strip stores daylight and glows in the dark for several hours if it has been "charged" sufficiently. An exact number of hours is not defined, but depends on the intensity and duration of light exposure.

Yes, the tape is self-adhesive and can be cut to size. The luminous effect ensures better visibility and orientation in the dark, even on a railing.

The tape is designed for permanent attachment with strong adhesion. Residue-free removal cannot be guaranteed depending on the surface and duration of use and may require aids for removal.

Yes, the rough surface of the tape is resistant and can be easily wiped with a damp cloth if necessary. It is also light and weather resistant.

Each strip has a length of 3 meters. For 10 steps of 50 cm each, you need a total of 5 meters of strip, which corresponds to two rolls of the 2in1 anti-slip luminous tape. (Roughly calculated: 10 steps * 0.5m/step = 5m total length.)

The tape is self-adhesive, but adheres best to smooth, clean and dry surfaces. With very uneven screed, the adhesion may be impaired.

Yes, the anti-slip light strip stores light during the day and glows for hours in the dark. It is designed to provide orientation and make tripping hazards visible without additional light sources.

The tape is self-adhesive and designed for permanent attachment. It is robust and provides additional safety even in high-traffic areas.

For an optimal and long-lasting luminous effect, the tape should be regularly exposed to sufficient light during the day, ideally sunlight. It charges with every incidence of light.

Yes, the anti-slip light strip is weatherproof and can therefore be used without restriction indoors and outdoors in the cold. The adhesive strength is retained.

Yes, the rough surface of the tape provides additional safety and grip on smooth floors like tiles. It is self-adhesive for easy application.

The tape is resistant to chemicals and abrasion, but a mild soap solution is recommended for care. Strong industrial cleaners could damage the surface or the adhesive bond in the long run.

Yes, the rough surface of the tape also offers reliably additional grip on wet steps. This significantly increases safety in senior households.

Yes, the tape can be cleaned with a mild soap solution. Mud and earth can be removed in this way without affecting the non-slip properties or the light function.

The rough surface is designed to be robust and abrasion-resistant to ensure permanent slip resistance. The tape is suitable for long-term use.

The anti-slip light strip is primarily intended for flat surfaces outdoors to ensure optimal adhesion. The durability of the adhesion could be limited on very rough or uneven paving stones. The rough surface of the strip itself, however, provides slip protection.

Yes, the tape is light and weather resistant and therefore ideal for outdoor use on boat docks. It provides additional safety there.

Yes, the tape is self-adhesive and adheres reliably to clean, dry, and level concrete floors. Its abrasion resistance also ensures permanent hold even with normal use.

Yes, the tape is light and weather resistant. The rough surface also ensures additional safety on outdoor ramps, even when wet.

Yes, the tape is weatherproof and has a rough surface that provides good grip even on wet metal ramps. The ramp must be thoroughly cleaned and dried before application.

Yes, the tape is light and weather resistant. It is specially designed for outdoor use, such as on wooden patios, and provides additional safety there.

The tape needs light to "charge" the glow effect. In a windowless basement with little or short light exposure, the glow duration and intensity will be correspondingly lower than with direct sunlight.

Yes, the rough surface of the tape provides a firm grip and is therefore also well-suited for dog paws on ramps to prevent slipping. It is also abrasion-resistant.

Yes, the light strip stores light and releases it in the dark. It thus provides additional safety and orientation, even in complete darkness.