Cordless impact drill 18 Volt Li-Ion WABS18BL -without battery and charger-

The integrated LED work light of the WABS18BL provides good visibility of the drilling or screwing point, even in dark corners. The belt clip is intended for hanging the device and should not interfere when putting it down or working.

Yes, the brushless motor of the WABS18BL ensures high efficiency and durability. This also makes it suitable for longer drilling work in harder woods, as the motor wears less and works more efficiently.

The integrated LED light is very useful for optimally illuminating the work area. This is especially helpful in dark corners or in poor lighting conditions.

The brushless motor of the WABS18BL ensures higher efficiency and less wear compared to conventional motors. This contributes significantly to an extended lifespan of the device.

Yes, the WABS18BL is equipped with an integrated LED work light. This illuminates the drilling or screwing point directly and ensures good visibility even in poor lighting conditions, such as in the basement.

The WABS18BL is designed for 18 volt Li-Ion batteries. As long as your batteries meet this specification, you can use them with the device.

Yes, the impact drill mode of the WABS18BL is ideal for normal drill holes in walls and masonry. It enables quick and effective work in various materials.

Yes, the metal quick-release drill chuck of the WABS18BL has a capacity of up to 13 mm. Therefore, drill bits with a shank diameter of 12 mm can be used without any problems.

The WABS18BL is suitable for drilling in wood with a torque of up to 40 Nm and a brushless motor. It can also handle larger Forstner bits, as long as the shank fits into the 13 mm chuck and the selected torque is sufficient.

Yes, the WABS18BL is very suitable for drilling in drywall. In 1st gear with low speed and adapted torque, clean holes can be drilled without damaging the material.

Yes, the brushless motor of the WABS18BL ensures a longer battery life, higher performance and a significantly longer service life of the device. In addition, the motor requires less maintenance.

Yes, the WABS18BL is suitable for drilling in metal. The 13 mm drill chuck and the high speed in 2nd gear (up to 1800 min-1) allow drilling in thicker metal profiles, depending on the material and the drill diameter.

Yes, the WABS18BL has a maximum impact rate of 0-28800 min-1 and is designed for drilling in stone materials. Normal brick walls are easy to work with.

No, the WABS18BL is an impact drill for drilling in masonry and screw applications. It is not designed as an impact wrench for changing tires on a car, as this requires a significantly higher torque and a different impact mechanism.

The torque of 30/40 Nm is designed for hard and soft materials. It offers enough power to securely screw screws into wood and other common materials.

The ergonomic soft grip of the WABS18BL is specially designed for comfortable and fatigue-free work. This ensures comfortable handling even during longer operations.

Yes, the 2-speed technology of the device is optimized for different applications. The first gear offers more torque for precise screwing, the second gear higher speeds for efficient drilling.

Yes, the WABS18BL has a robust 13 mm metal quick-release chuck. This is designed for durability and allows for quick and secure tool changes, even with frequent use.

The torque of 30/40 Nm (soft/hard) is absolutely sufficient for screwing Spax screws into wood and chipboard. The 2-speed technology helps with optimal power transmission.

At only 1.2 kg, the WABS18BL is very light and the ergonomic soft grip supports comfortable handling. This also makes it well-suited for longer use or overhead work.

Thanks to the 2-speed technology, you can adjust the speed. The first gear offers more torque for precise screwing, while the second gear uses the high speed of 1800 min-1 for efficient drilling.

Yes, the WABS18BL is designed as an impact drill and easily handles drilling work in harder materials such as concrete or brick.

Yes, the 1st gear of the WABS18BL with a low speed of 0-500 min-1 is ideal for precise screwing. In combination with the torque setting, you can screw small screws into furniture in a controlled manner and avoid overtightening.

The belt clip allows you to quickly and securely attach the WABS18BL to your belt. This is especially practical when you are working on the ladder or in hard-to-reach places and need your hands free.

The WABS18BL is suitable for drilling in stone with a maximum impact rate of 28800 min-1 and the 13 mm metal quick-release drill chuck. The maximum drilling depth and diameter depend heavily on the type of stone and the drill bit used.

With a weight of only 1.2 kg, the WABS18BL is relatively light and compact. This makes working on ladders or overhead easier and reduces fatigue during longer use.

Yes, the first gear of the WABS18BL with 0-500 min-1 is ideal for precise screwing and offers better control due to the lower speed. This also contributes to more efficient battery use.

With dimensions of only 20x10x23 cm and a low weight of 1.2 kg, the WABS18BL is very compact. It is ideal for working in tight or hard-to-reach places.