Roll tarpaulin for trailers

The loading area unloader is designed to reduce the unloading time many times over. The hand crank also allows larger quantities of construction waste to be unloaded efficiently and in a back-friendly manner.

The roll-up tarpaulin is 300 cm long and therefore well-suited for a loading area of 2.50 m (250 cm). Please note the specified trailer width of 110 to 140 cm.

Yes, the system is also suitable for garden waste such as wood chips or bark mulch. It serves as a manual conveyor belt for loose bulk material.

The hand crank is designed for convenient emptying of the trailer. The ease of use depends on the individual height of the side walls, but should be easily accessible in most cases.

The roll-up tarp is mounted on the rear of the trailer before loading and can generally remain there. However, for longer storage, it is recommended to store it protected from the weather in order to extend its lifespan.

The tarp is designed for materials like rubble and garden waste, which implies a certain robustness. However, caution is advised with very pointed or sharp-edged objects to avoid damage.

The tarpaulin is designed for trailer widths from 110 cm to 140 cm. With a width of 105 cm, optimal function and secure hold cannot be guaranteed.

Yes, the system is also suitable for light and bulky materials such as empty cardboard boxes. Styrofoam can also be unloaded without any problems.

The roll-up tarp is easy and quick to assemble. The installation can usually be carried out without any problems on your own.

The roll-up tarp has a width of 110 cm. With a trailer of 140 cm width, approx. 15 cm of the loading area remain uncovered on the sides. The maximum trailer width of 140 cm refers to the mounting option of the steel tube.

The system is designed for easy and back-friendly operation. Unloading requires only a small amount of effort and is therefore also easy to handle for seniors.

After use, you can simply clean the tarp with water and a brush. Stubborn dirt can often be removed with a mild cleaner.

The system is designed for trailers with a width of 110 to 140 cm, regardless of the type. As long as these width dimensions are adhered to, the unloader should also work with high loaders.

The cover is robustly built. However, for a long service life, we recommend removing or covering it when not in use and in bad weather.

Yes, the roll-up tarp can withstand up to 200 kg. This allows the unloading of gravel, sand and similar heavy materials. (This corresponds to about 100 to 130 liters of gravel, roughly calculated).

The manual conveyor belt is designed to empty the trailer efficiently and reduce the time for unloading. Material residues should be minimal, the goal is a complete emptying without sweeping afterwards.

Yes, the tarp is also suitable for wet grass clippings. Please note the maximum load capacity of 200 kg for the system to avoid overloading.

Yes, the roll-off tarp turns the trailer into a 'tipper' and saves the tedious manual shoveling. This saves a lot of time and protects your back.

The roll-up tarpaulin is designed exclusively as a loading area unloader. It is mounted at the rear before loading and laid out on the trailer floor to facilitate unloading, not loading.

The roll-off tarp is designed for unloading bulk materials. With very fine, dusty material, there may be a slight leakage on the sides, but the main load remains secure.