Chainsaw chain Titan 3/8" LP 1,3-36

The chain assembly is straightforward. You place the chain on the rail, adjust the tension, and secure it. The exact match to the model 959889 enables a smooth integration.

The saw chain should be cleaned after use and stored in a place protected from moisture to prevent rust. Storage outdoors in winter conditions is not recommended.

Yes, this saw chain is suitable for cutting firewood, especially if it's smaller to medium diameters that are cut with an electric chainsaw. Pay attention to the correct sharpness and lubrication.

Yes, this saw chain is suitable for cutting softwood and hardwood, as found in deciduous trees. Pay attention to correct chain tension and sufficient lubrication during work.

The saw chain is designed to withstand high loads and retain its sharpness longer. The recommendation to start slowly serves to minimize wear and to achieve optimal cutting results. Occasional deviations should not dull the chain immediately.

For smaller felling work on thinner trees in the private sector, this chain can generally be used in conjunction with an electric chainsaw. Always pay attention to the maximum cutting capacity of your saw and the safety instructions.

The Titan saw chain is well-suited for pruning fresh wood in the garden. It offers efficient cutting performance for the typical tasks of an electric chainsaw.

The saw chain WF-960756 has a low kickback potential, which increases safety when caring for trees. An optimized tooth geometry also contributes to better control.

To avoid rust formation, it's important to store it in a dry place. After each use, the chain should be cleaned and oiled, especially if it has gotten wet. Regular maintenance extends the service life.

To check compatibility, we need the exact chain data for your chainsaw. This chain has a pitch of 3/8" LP, a drive link thickness of 1.3 mm and 36 drive links.

The saw chain WF-960756 offers efficient chip removal, even with dense wood types. This helps to avoid clogging and ensures a consistent, clean cutting performance.

The sharpening intervals depend heavily on the use and the type of wood. Regular checking of the sharpness is important. The chain can be sharpened with a suitable round file (Ø 4.0 mm).

The saw chain with 3/8" LP pitch and 1.3 mm drive link thickness is suitable for light to medium tree work, such as delimbing or cutting smaller branches with an electric chainsaw. For larger trees, chains with other specifications are usually required.

Yes, the Titan saw chain is particularly cut-resistant due to its material properties. It is ideal for occasional work in the garden as it retains its sharpness longer.

The saw chain WF-960756 is specially designed for the pole pruner 959889, with 3/8" LP, 1.3 mm chain pitch and 36 drive links. An exact match to this model ensures smooth integration.

Yes, the 3/8" LP (Low Profile) chain pitch is generally designed for less kickback. This contributes to increased work safety when in use.

Yes, the saw chain WF-960756 has a groove width of 1.3 mm (0.050 inch). This thickness is suitable for many commercially available guide bars.

No, the chain is designed with a chain pitch of 1.3 mm for fine and precise cuts. Its sharp cutting teeth create clean cut surfaces and improve precision when pruning branches.

The saw chain WF-960756 is characterized by high material quality, which ensures long-lasting use. It withstands high loads and retains its sharpness longer.

Yes, the saw chain WF-960756 has a pitch of 3/8" LP (Low Profile). If your chainsaw requires this pitch and a groove width of 1.3 mm, it is compatible.

Regular oiling is essential for the longevity of the chain. Please keep the saw chain clean, oil it and store it dry to maintain the function.

This saw chain has 36 drive links, a pitch of 3/8" LP and a drive link thickness of 1.3 mm. These are the common specifications for 30 cm bars on many electric chainsaws. Please compare the data of your old chain.

Yes, the saw chain is suitable for chopping up hedge branches. For longer use, please ensure sufficient oil supply to the chain and take breaks to avoid overheating and to check the chain.

Yes, the saw chain WF-960756 is suitable for use with medium to hard woods. Please start slowly when sawing to ensure precise cuts.

Yes, the saw chain is specially designed for pole pruners and offers stable guidance on the rail. The optimized tooth geometry ensures reduced vibrations and better control. This supports safe handling even when working from the ground.

The saw chain WF-960756 is equipped with an optimized tooth geometry, which ensures reduced vibrations. This enables better control and more pleasant work.

This saw chain with 36 drive links, a pitch of 3/8" LP and a drive link thickness of 1.3 mm is typically designed for a bar length of 30 cm (12 inches). Please check the specifications of your chainsaw.

Yes, this saw chain with 36 drive links is suitable for chainsaws with a 25 cm bar. Please also check the correct pitch (3/8" LP) and gauge (1.3 mm) of your saw.

The chain pitch of 1.3 mm enables fine and precise cuts when pruning branches. The optimized tooth geometry of the chain also ensures improved control and cutting accuracy.

The addition of "Titan" in the product name stands for increased material hardness and improved cutting ability. This can contribute to a longer lifespan and less frequent sharpening.