Mold Stop 500 ml

Yes, Schimmel Stop is effective for "problem corners in the apartment, kitchen, bathroom and basement", where moisture promotes mold. Simply spray the product on and let it work for 2 hours.

Good ventilation must be ensured during application. The product itself leaves no harmful residues after application.

The product is characterized by its easy handling. It is designed to remove mold in a straightforward manner.

The product is for spraying and for walls in apartments, kitchens, bathrooms and basements. Make sure the surfaces of electrical appliances are dry and ensure good ventilation.

One bottle of Schimmel Stop (500 ml) is designed for approximately 5 to 15 m². Therefore, one bottle should be sufficient for an 8 square meter bathroom.

The Schimmel Stop is chlorine-free. For allergy sufferers, it is advisable to carefully check the product information before use and consult a doctor if necessary.

The Schimmel Stop removes mold reliably. Its formulation is designed to effectively eliminate existing mold.

The application is simple: The product is sprayed directly on and then has to work for 2 hours. A pre-cleaning of the affected areas is not explicitly required.

No, the application is very simple: The product is sprayed directly on and then needs to work for 2 hours. Pre-cleaning is not necessary.

Yes, the Schimmel Stop is suitable for outdoor use. It can reliably remove mold from house walls and base areas.

Yes, the product is expressly suitable for wallpaper, including textured wallpaper. It removes the mold infestation and effectively eliminates gray or black spots.

No, Schimmel Stop is chlorine-free. This avoids typical chlorine stains on materials.

Yes, the Schimmel Stop is designed to reliably remove mold, no matter how long it has been present.

Yes, the Schimmel Stop is designed for outdoor use. It reliably removes mold from various outdoor surfaces, including plastic.

Yes, the Schimmel Stop can also be used in rooms without windows. Make sure to ventilate well and sufficiently during and after application.

The description of the Schimmel Stop focuses on the reliable removal of mold. A preventative effect is not explicitly mentioned in the product features.

One bottle of Schimmel Stop contains 500 ml, which is sufficient for an area of approx. 5 to 15 m². This is absolutely sufficient for 7 m² of kitchen wall.

You should wear protective clothing during use. Also, ensure good ventilation of the room, especially during the exposure time.

The exposure time of 2 hours is designed to kill mold spores and ensures high effectiveness. The product was specifically developed for tile joints.

The Schimmel Stop is formulated without chlorine. This reduces the risk of bleaching on colored walls when used indoors for mold removal.

The product is chlorine-free, which may irritate the airways less than chlorine-containing agents. However, it is recommended to ensure good ventilation during use and to observe the general safety instructions.

Yes, Schimmel Stop is suitable for use in the kitchen and cellar. It leaves no harmful substances after use.

Schimmel Stop is chlorine-free and suitable for indoor use. Application on plastered walls or wallpaper is therefore possible to reliably remove mold.

The product can be used in the kitchen, basement and on walls. It ensures clean surfaces by removing gray or black spots.

One bottle of Schimmel Stop with 500 ml is sufficient for about 5 to 15 m². For a balcony ceiling of 10 m², one bottle should therefore be sufficient. (Roughly calculated: It is in the middle range of the specified range.)

It is recommended to wear protective clothing when using and to ensure good ventilation. This is for your safety.

Yes, Schimmel Stop can be used on walls and wallpaper, even in problem corners or on sloping roofs, to remove mold.

Yes, the Schimmel Stop is explicitly declared as chlorine-free. It reliably removes mold indoors without chlorine.

Yes, the Schimmel Stop is specially developed for sanitary facilities such as shower walls and similar areas. This also includes toilets and sinks.

The product reliably removes mold and is chlorine-free. Application on silicone joints should be unproblematic, as it does not contain aggressive bleaching agents.