Automatic welding helmet with additional LED

Yes, the helmet is explicitly suitable for electrode welding. The automatic darkening and the fast switching time offer reliable protection.

The helmet is designed for demanding welding work and is ideal for common processes such as MIG/MAG, TIG/WIG and electrode welding. It offers high safety and protection for professionals and DIY enthusiasts.

Yes, the automatic darkening of the helmet switches from light to dark in a flash, in 1/25,000 seconds. This ensures precise and reliable eye protection even with rapid light changes.

Yes, the additional LED lighting is explicitly intended to improve visibility in difficult or poorly lit work areas. So you have a clear view even with dark workpieces.

The automatic welding helmet with adjustable protection level DIN 9 – 13 and good field of vision is very versatile. It is ideal for DIY enthusiasts who weld occasionally and value comfort and safety.

The helmet is explicitly suitable for welding and grinding. You can use it for both applications, which allows a smooth transition between the work steps.

The helmet is primarily powered by a solar cell, supported by 2x LR03 (AAA) batteries. This combination ensures reliable operation even in poor lighting conditions or indoors.

The solar cell primarily powers the helmet with sufficient ambient light. The two AAA batteries (LR03) serve as an additional power source and ensure reliable operation even with less light or longer use. The batteries are therefore recommended for constant function.

The ergonomic headband is designed to distribute pressure evenly. This prevents fatigue and allows for comfortable wear even during prolonged sweaty work.

The helmet has an adjustable sensitivity that allows you to adjust the reaction to the arc. This allows for precise adjustment to different welding jobs and lighting conditions.

The large field of view of the helmet measures 92x42 mm. Replacement shields in this standard size are usually available in specialist shops or at Westfalia to ensure a long service life.

The welding helmet is equipped with an additional LED, which is specially designed to improve visibility in poorly lit or confined work areas. So you can work precisely there too.

Yes, the helmet has a large field of view of 92x42 mm. This ensures a good overview of the workpiece and supports fatigue-free work, even with precise tasks.

Yes, the protection level is adjustable directly on the helmet. This allows for convenient and quick adjustment of the darkening, even while you are wearing the helmet and working.

Yes, the lightening time of the helmet is adjustable. You can adjust it to your needs to allow a smoother transition from dark to light and thus reduce eye strain.

Yes, the extremely fast switching time of 1/25,000 seconds from light to dark offers maximum eye protection. This minimizes the risk of a "flash" even with very short or fast arcs.

Yes, the helmet is explicitly suitable for TIG welding. Thanks to the adjustable sensitivity, it can also react reliably at low amperage.

Yes, the helmet is equipped with an additional LED. This significantly improves the visibility of the workpiece, especially in dark working environments or in poor lighting conditions.

The automatic welding helmet is designed to darken automatically when a welding arc is detected. It does not react to constant ambient light or sunlight, but only to the welding process.

Yes, the helmet has a special grinding mode. This is intended for general grinding work and protects your eyes from sparks and particles.

The automatic darkening happens extremely fast with a switching time of 1/25,000 seconds. This ensures immediate and reliable protection of your eyes even with very fast arc changes.

The solar cell is used to power the helmet and does not charge the LR03 (AAA) batteries used. These must be changed manually if necessary.

The helmet is primarily designed for gas-shielded and electrode welding (MIG/MAG/WIG/TIG). Suitability for plasma cutting is not explicitly stated in the specifications.

The helmet is designed for use in workshops, but there are no specific temperature specifications. The batteries are designed to operate within a normal temperature range.

The product description mentions adjustable sensitivity and brightening time. However, it is not explicitly stated that these settings are accessible from the outside. Typically, such controls are located on the inside of the helmet.

The helmet has adjustable reaction times, including a special "grinding" mode. You can adjust the mode directly on the helmet without having to take it off.

The helmet offers an adjustable protection level of DIN 9 – 13 on the device. This range covers a variety of welding processes and currents to ensure optimal eye protection.

The helmet offers an adjustable protection level from DIN 9 – 13. This wide range is well suited for MIG/MAG welding and allows you to adapt to different amperage and material thicknesses.