Cordless screwdriver 3.6V X-Grip 2

The 700 mAh Li-Ion battery enables typical assembly work. The running time depends on the number and torque of the screws. A full charge via USB is achieved in 1-2 hours.

Yes, the cordless screwdriver is quickly ready to use. The charging time is only 1-2 hours, and the quick-release tool holder allows for a quick bit change.

The integrated LED light of the X-Grip 2 illuminates the direct work area well. For overhead work, such as ceiling mounting, it is a helpful support.

The idle speed of 200 rpm is well suited for quickly screwing and unscrewing screws during assembly work. This saves time and effort compared to a manual screwdriver.

Yes, the X-Grip 2 is equipped with a manual torque of up to 10 Nm, which was specially developed for tight screws. This makes assembling furniture much easier.

You can also connect the X-Grip 2 to the USB cable for shorter charging cycles in between. The Li-Ion battery is flexible in its charging behavior and does not always have to be fully charged.

Yes, the integrated anti-slip handle ensures a secure grip, even when working overhead. This ensures controlled guidance of the device.

The integrated LED light of the X-Grip 2 provides good illumination of the direct work area. It helps you to work precisely, even in poorly lit places.

The X-Grip 2 offers an electronic torque of 2 Nm and manually up to 10 Nm. This is also sufficient for stuck screws, as you can tighten manually if necessary.

The X-Grip 2 cordless screwdriver is designed for DIY projects, furniture assembly and smaller repairs. It is not primarily designed for very long, uninterrupted continuous use.

Yes, the X-Grip 2 is designed for quick use and is always ready to go. It is excellent for spontaneous fastening or tightening.

The screwdriver is characterized by its easy handling and powerful implementation. These characteristics also make it suitable for a variety of precision work.

Yes, the X-Grip 2 cordless screwdriver is charged via a standard USB cable. You can use any standard USB power supply or a USB port for this.

Yes, the manual torque increase up to 10 Nm is reliable and is especially intended for very tight screws. You use the device like a conventional screwdriver and also turn by hand.

Yes, the X-Grip 2 enables powerful implementation for common screw work. It is well suited for the installation of light switches or sockets.

The X-Grip 2 is deliberately designed to be easy to use. You can operate the device intuitively without having to study a long manual beforehand.

Yes, the X-Grip 2 has an integrated LED light. This effectively illuminates even dark work areas and enables precise work in cabinets or under furniture.

The X-Grip 2 enables powerful implementation and easy handling. The device is well suited for precision screw work, including in the electronics sector.

The cordless screwdriver offers a powerful implementation for common screw work. Longer screws in furniture construction are usually easy to handle with it.

The cordless screwdriver enables powerful implementation for common screws. Loose screws in a kitchen cabinet can be tightened well with it.

The cordless screwdriver uses a 1/4" hex shank quick-release chuck. With it, you can use all common bits with this standard size, not just the ones supplied.

The X-Grip 2 is designed to be compact and lightweight to facilitate assembly work. We do not have exact weight specifications, but the design is intended for easy handling.

The X-Grip 2 can be used for larger wood screws, especially by switching to manual operation. A torque of up to 10 Nm is achieved here, which also loosens or tightens stuck screws.

Electronic devices with Li-ion batteries should not be permanently exposed to extreme temperatures. Store the X-Grip 2 battery screwdriver dry and at room temperature to maintain its lifespan.

The non-slip grip of the X-Grip 2 offers improved grip even with slightly oily hands. However, you should remove extreme contamination beforehand to ensure optimal grip.

The screwdriver is quickly ready to use. It's ideal for spontaneous screwing jobs and always at hand when you need it.

Yes, the X-Grip 2 is designed for easy handling. The non-slip grip supports precise and comfortable work, which also makes it ideal for smaller fastenings.

No, the X-Grip 2 is equipped with an anti-slip grip. This ensures a secure hold and prevents slipping, even with wet hands.