Belt sander WABS18 18 Volt (without battery and charger)

The WABS18 is primarily designed for surface grinding with high metal removal. For very fine deburring work on edges, it could be too coarse due to its size (sanding belt 76 mm wide).

Yes, the WABS18 is part of the Westfalia 18 Volt battery system. You can use your existing Westfalia 18V batteries and chargers.

Yes, the WABS18 belt sander is designed for working with wood and can also be used for smoothing filler on wooden surfaces. It ensures a fast and smooth surface treatment.

The ergonomic shape and the non-slip additional handle allow for precise tool guidance. Thus, the belt sander is also well-suited for edge work.

Yes, the WABS18 belt sander is very suitable for effectively removing old paint layers from furniture thanks to its high removal rate and a maximum idle speed of 280 m/min. The freely selectable speed regulation allows adaptation to the material and the thickness of the layer. For best results, the use of suitable sanding belts is recommended.

Yes, the ergonomic shape and the non-slip additional handle ensure safe and comfortable tool guidance. This also facilitates longer work assignments.

Yes, the WABS18 belt sander is designed for working on large metal surfaces. Its high removal rate allows for effective removal of rust and other contaminants.

The non-slip 2-component additional handle provides a firm grip and improves control. The device can in principle be used for overhead work, but can be demanding during longer operations.

Yes, the freely selectable speed control allows for precise adjustment of the belt speed. This allows you to use the belt sander even with softer woods, appropriate for the material, and avoid ruining anything.

Yes, the belt sander WABS18 is ideal for large wooden surfaces with its high removal rate. It is well suited for removing old paint and varnish layers.

Yes, the convenient quick-change system of the WABS18 was specially developed for a safe and quick sanding belt change. This enables a fast and uncomplicated replacement of the belt.

The belt sander WABS18 is designed for high removal performance on large surfaces. With the sanding belt size of 76 x 457 mm and an idle speed of up to 280 m/min, you will quickly achieve smooth surfaces. The exact time depends heavily on the material and the desired fineness.

Yes, the WABS18 belt sander has speed control. With the right grit of the sanding belt, it can be used for various materials such as wood and metal.

Yes, the belt sander WABS18 has a speed regulation. This allows you to adjust the material removal rate to sensitive materials.

The belt sander's dust bag effectively captures fine dust and ensures a clean work area. For longer sanding jobs or high dust levels, it should be emptied regularly.

Yes, with the WABS18 you can effectively remove paint residue. The adjustable speed helps to control the removal rate and protects the surface.

The product description explicitly mentions large metal and wooden surfaces as areas of application. Suitability for plastic surfaces is not guaranteed and should be tested carefully if necessary.

The ergonomic shape of the WABS18 is designed to ensure comfortable handling for different hand sizes.

The belt change is very easy and quick to perform thanks to the quick-change system. This allows for a quick change between different grits or belts.

Yes, the non-slip additional handle and the ergonomic shape of the device support safe and comfortable guidance. This makes working on wooden floors more comfortable.