Oil suction pump, 12 volts

The extraction speed depends on the oil temperature and viscosity. With warm engine oil, you can expect an extraction rate of about 1.5-2 liters per minute. For 6 liters, that would be about 3-4 minutes.

The pump enables a nearly complete oil extraction. This contributes to an efficient oil change.

Yes, the pump is suitable for engine oil in various vehicles and machines, so also for smaller engines such as those of a generator. The maximum suction height of 70 cm should be sufficient for this.

The pump is simply connected to a 12-volt vehicle battery via the supplied crocodile clips.

Yes, the device is flexible for use in various vehicles and is therefore also suitable for oil changes on boats.

The device comes complete with the necessary accessories to be used flexibly for various vehicles. This includes the hoses needed for oil extraction and an instruction manual.

Yes, the pump is flexible and can be used for various vehicles, which also includes motorcycles.

Yes, the pump comes complete with all necessary accessories and instructions.

The pump enables a quick and efficient oil change. The exact extraction time for 5 liters depends on the oil temperature and viscosity, but is generally done quickly.

The device is made of reinforced plastic and is designed for workshop use. It can withstand the usual stresses.

Yes, the pump was developed to significantly simplify the oil change. It allows the oil to be sucked out from above, which significantly reduces the effort compared to draining via the screw.

The maximum suction height of the pump is 70 cm. This is sufficient for most car and small vehicle engines. This should be checked in advance for engines that are positioned very high.

The pump comes with a flexible hose that usually fits through the oil dipstick opening. Special adapters are usually not required.

The 12-volt pump is designed for operation via crocodile clips. Thus, it can be connected to any suitable 12V battery or other 12V source with the corresponding connections.

The pump comes complete with the necessary accessories and instructions and can be used flexibly for different vehicles.

The device is connected directly to a 12V battery with the crocodile clips. An extension of the cable is not intended and could affect performance.

The sturdy material made of reinforced plastic is designed for workshop use. However, extreme or prolonged exposure to heat in the car should be avoided to ensure the longevity of the device.

Yes, the main advantage of this oil extraction pump is that you can conveniently change the oil from above. A lift or pit is not required for this.

The WF-985758 is specially designed as an oil extraction pump and is intended for a quick, efficient oil change. Its main function is to extract oil from vehicles.

The pump operates quietly during normal operation. For the oil change, a continuous operating time of a few minutes is sufficient and safe.

Yes, the pump is designed for a quick and efficient oil change and offers easy operation.

The pump is designed for a quick and efficient oil change. It offers a nearly complete oil extraction.

The hoses and seals are designed for a long service life. A regular change is not necessary with normal use, only cleaning after each use.

Yes, the pump is very easy to operate and is done via crocodile clips directly on a 12-volt vehicle battery.

The pump is specially designed for quick and efficient oil changes in various vehicles.

The pump is specially designed to allow oil changes to be clean and without mess. Through the suction and the flexible hose, soiling in the garage is minimized.

Yes, the pump is ideal for home use and allows the oil change without a lift or pit. The maximum suction height of 70 cm must be observed.

The compact cylinder housing allows for easy storage. After use, the pump should be cleaned and stored dry.