Anvil twig shears with telescopic handle, 50 mm cutting thickness

The telescopic pole significantly extends your individual reach to reach higher hedge sections or branches. The exact working height depends on your height and the extension length.

Yes, this anvil branch cutter is particularly good for cutting dry and hard wood. The cutting thickness is a maximum of 50 mm.

Yes, the ratchet function is specially designed to significantly reduce the effort required. It enables effortless cutting of branches up to 50 mm in diameter with little physical exertion.

The anvil pruning shear is particularly efficient on hard and dry wood. However, it can also be used for cutting fresh branches if they are within the maximum cutting thickness.

The branch shears are designed for a maximum cutting thickness of 50 mm (equivalent to 5 cm). Reliable cutting is possible within this specification.

The number of ratchet strokes depends on the type of wood and the density of the branch. However, the ratchet function is designed to translate the force optimally and enable cutting with several small, energy-saving strokes. So you can easily cut branches up to 50 mm.

Yes, the telescopic handle significantly increases your reach, so you can safely reach low-lying or thorny branches without having to reach directly into the bush. The 50 mm cutting thickness also handles stronger branches.

Yes, the anvil mechanism of the shears is also suitable for hard and fibrous wood such as older vines. The maximum cutting thickness is 50 mm.

Yes, with the loppers and their cutting thickness of 50 mm, you can easily chop up branches lying on the ground.

The anvil branch shear can also cut fresh branches, but is particularly effective on dry, hard or dead wood. For a very clean cut on fresh wood, bypass shears are often better suited.

The anvil shear is designed for a high leverage effect, which reduces the effort required even for thicker branches. It cuts branches up to 50 mm with less effort.

The telescopic handles are adjustable and allow working at heights of up to 3 meters when you are standing on the ground. They significantly extend your natural arm reach to reach even distant branches.

Yes, the branch shears with their cutting capacity of 50 mm are very well suited to cut even thick, woody blackberry vines. The anvil function helps to cut through tough materials.

Yes, the telescopic handles are adjustable and allow a reach of up to 3 meters. With them, you can easily and safely thin out older, tall rose bushes.

The telescopic handle allows reaching higher branches without a ladder. Information on specific ergonomics or weight when working overhead is not included in the description.

The ratchet mechanism is designed to reduce the effort required. For thicker branches up to 50 mm, you cut in stages by squeezing the handles several times to cut through the branch with less effort.

Yes, with the telescopic handles you can position the shears for branches in the tree crown well. The ratchet function enables effortless cutting of even thicker branches up to 50 mm in diameter. The hardened steel blade ensures a precise and clean cut.

Thanks to the telescopic handle, the shears allow comfortable work even on higher branches up to 50 mm in diameter. The design is designed for a good balance to minimize strain during longer use.

The robust construction made of high-quality materials ensures durability. However, for optimal condition and years of use, dry storage after use is recommended.

Yes, the WF-984106 is designed with the anvil system especially for cutting hard and dry branches up to 50 mm in diameter. This makes cutting easier with less effort.

Yes, thanks to the telescopic handle, you can adjust the length to comfortably reach even lower branches or cut material on the ground.

The telescopic handle of the shears is ideal for cutting branches inside tree crowns or in hard-to-reach places.

Yes, that should be possible. The telescopic pole of the branch cutter is designed to reach higher branches. The effective reach depends on your height and the maximum extension length of the pole.

Yes, shredding cuttings is easily possible with these loppers. Thanks to the telescopic handle, you can also comfortably and back-friendly work on branches lying on the ground.

Regular cleaning of the blades after each use is recommended to maintain functionality. With heavy use, the blades should also be sharpened if necessary to ensure optimal cutting results.

The integrated telescopic handle allows you to conveniently reach and cut branches that are higher up or difficult to access from the ground.

Yes, the robust anvil branch cutter is suitable for use on thorny bushes and branches up to 50 mm cutting thickness. Protective clothing is recommended.

The telescopic handle of the branch cutter was developed to reach even hard-to-reach branches in dense bushes or shrubs. This allows you to work comfortably and without straining your back.

The telescopic handle can be adjusted in length to adjust the reach and leverage. The mechanics are designed for reliable handling.

Yes, the branch shear is designed for a maximum cutting thickness of 50 mm. Anvil shears are particularly suitable for woody and dry branches.