3/4" to 1/2" Stainless Steel Reducing Nipple - V4A Threaded Fitting

Yes, this stainless steel fitting can be easily removed, unlike welded or press fittings. This allows flexibility during modifications.

Yes, the reducer made of stainless steel 316 (V4A) is rust-free and corrosion-resistant. It is generally also suitable for use in contact with chlorinated pool water.

Yes, this reducer nipple is designed exactly for that. It has a 3/4" external thread and a 1/2" external thread.

Yes, the reducer is suitable for both cold and hot water. It withstands temperatures from -20 °C to +200 °C.

Yes, to seal the threads you will need suitable sealing material. Hemp or Teflon tape are suitable for this.

The stainless steel reducing nipple is designed for a temperature range of -20 °C to +200 °C. The high temperatures of a solar system in summer are therefore not a problem for the material.

The reducer nipple is designed for a working pressure of up to 10 bar. This covers most applications in water technology.

Yes, the reducer fitting made of stainless steel 316 (V4A) is very durable and corrosion-resistant. It can remain outdoors for many years.

The tapered external threads are sealed with standard thread sealant material such as PTFE thread seal tape or sealing hemp. A special seal is not required.

For sealing conical external threads, both hemp and PTFE thread seal tape are suitable. Both materials provide a permanently tight connection when applied correctly. The choice often depends on personal preferences.

Yes, the threaded fitting is designed for a working pressure of up to 10 bar. With a peak pressure of 8 bar, your system is within the specifications of the BONI-42276-201.

Yes, the material withstands temperatures from -20 °C to +200 °C. Permanent outdoor installation is thus possible even in frost.

The stainless steel fittings are designed to be removable, unlike welded or pressed fittings. For renewed tightness after removal, the thread should be covered with fresh sealing material.

The nipple is designed for a temperature range of -20 °C to +200 °C. It can therefore remain outdoors even in winter temperatures.

Yes, the reducer nipple is made of stainless steel 316 (V4A), which is considered rust-free and permanently corrosion-resistant. It is therefore also suitable for use with saltwater.

Yes, the double nipple is ideal for garden irrigation systems as it is robust and chemical-resistant.

The double nipple made of hard PVC is resistant to a variety of chemicals and is suitable for plant construction. For special media in the industrial sector, we recommend a prior check of the chemical resistance.

The external threads of this reducing nipple are tapered. During installation, it is particularly important to pay attention to proper sealing with suitable thread sealing material such as hemp or PTFE tape to ensure a reliable connection.

Stainless steel 316 (V4A) is highly corrosion-resistant and therefore well-suited for media with chemical additives like fertilizer. It is more resilient than many other materials.

Absolutely, this threaded fitting is ideal for garden irrigation systems. Its rust resistance and durability are major advantages.

The thread needs to be additionally sealed with a suitable sealing material. Hemp or Teflon tape are suitable for this.

Yes, the threads are manufactured according to common standards and allow for a seamless transition to other pipe materials. A special transition fitting is not necessary.

Stainless steel 316 is rust-free, corrosion-resistant, and more durable than PVC, especially under UV radiation and temperature fluctuations. It offers higher mechanical stability and temperature resistance.

Yes, the reducer nipple is made of stainless steel 316 (V4A), which is rust-free and highly corrosion-resistant. It is durable and withstands slightly acidic rainwater over long periods.

Yes, the reducer nipple is explicitly suitable for both cold and hot water applications. Its temperature resistance goes up to +200 °C.

Yes, the threads of this fitting are designed to allow a seamless transition to other pipe materials. A separate transition fitting is not necessary.

Yes, the reducing nipple is designed for a working pressure of up to 10 bar. This is fully sufficient for most common pumps and irrigation systems.

Yes, unlike welded or press fittings, this stainless steel threaded fitting can be disassembled and reused at any time. Only the sealing material needs to be replaced.

Yes, the stainless steel fittings are designed to allow a seamless transition to other materials. Pay attention to the correct thread sizes of 2 inches and 1 1/4 inches.

The reducer nipple is stainless, corrosion-resistant, and durable, making it ideal for permanent use. It is suitable for cold and hot water as well as pressures up to 10 bar.