Plastic Connectors
In this category you will find quick couplings, T-pieces, coupling connectors and hose tap connections made of plastic for garden irrigation. The connectors fit garden hoses and are suitable for common plug systems.
Buying plastic connectors — guide& Tips
The plastic connectors category includes 334 items specially developed for flexible and reliable connection of garden hoses. Check the respective product details for the properties and certifications important for your selection. The range includes adapters, coupling connectors, faucet connections and especially quick couplings that fit common plug systems such as those from Gardena, Wolf or Kärcher – compatibility information is always provided in the product description.
When buying, pay attention to the intended use: Do you want to permanently install a hose on a faucet? Then choose a faucet connector with 3/4 inch or 1/2 inch thread. If watering should be flexible, for example when frequently switching between sprayer, shower head and lawn sprinkler, then quick couplings are the right choice. AlsoTees – so-called Y-pieces or T-pieces – help supply multiple hose lines from one source. For this reason, the products are divided into the subcategories quick couplings, tees, coupling connectors and faucet connections.
Since the connectors are made of plastic, they score with low weight and UV resistance (pay attention to the relevant information). A common mistake: Do not blindly buy the cheapest version, but check the hose diameter – usually 1/2 inch (13 mm) or 3/4 inch (19 mm). A fit that is too loose leads to pressure loss, a fit that is too tight can damage the hose. For permanent installations – e.g. at the faucet – fixed couplings or transition pieces from the Connectors + Accessories are more suitable.
Popular Plastic Connectors
Below you will see three frequently requested products from the category Plastic Connectors. These items exemplify typical applications: connecting an IBC container to garden irrigation. The cards help you understand the selection.
IBC Adapter S60 – Water Tap & Quick Coupling
Enables direct connection of an IBC container with S60 thread to a standard garden hose via a 3/4-inch quick coupling.
To product →
IBC Adapter S60 – Ball Valve & Quick Coupling
Combines a ball valve for shut-off directly at the container with a 3/4-inch quick coupling. This allows you to control the water supply and disconnect the hose at any time – practical for pasture irrigation.
To product →
IBC Adapter S60 – Outlet Valve
A simple outlet valve for the IBC container, also with a 3/4-inch connection. Particularly suitable if you only need to draw water occasionally and do not require a ball valve. Replaces the original container tap.
To product →All three products show how plastic connectors are also used in rainwater harvesting. The IBC adapters are a practical addition if you want to integrate a container with S60 thread into your garden irrigation. Please note: The plug-in couplings are compatible with common quick-coupling systems – check before purchase whether your hose system is compatible. In the category Connectors + Accessories you will find further transition pieces and adapters.
Frequently asked questions about plastic connectors
Which plastic connector is the right one for my garden hose?
This mainly depends on the hose diameter. Measure the inner diameter of your garden hose – common sizes are 13 mm (1/2 inch) and 19 mm (3/4 inch). Then select the appropriate connector: For a 13 mm hose, use quick couplings or coupling connectors with a 13 mm coupling; for a 19 mm hose, use the 3/4-inch version. Faucet connections usually have a 3/4-inch or 1/2-inch thread. Also make sure that the system (e.g., original Gardena or compatible) matches your existing accessories. Plastic connectors are corrosion-free, but not all are suitable for permanent frost – do not leave them on the hose in winter.
Can I also use plastic connectors for irrigation controllers?
Yes, many irrigation controllers have a 3/4-inch or 1/2-inch connection that is compatible with most plastic connectors. However, you should ensure that the connectors are pressure-tight and suitable for operation with an irrigation controller. Preferably use quick couplings or transition pieces from the categoryConnectors + Accessories, which provide a pull-resistant locking mechanism. Some irrigation controllers require a separate seal – this is often included in the scope of delivery. If unsure, ask a specialist retailer.
How do plastic connectors differ from brass connectors?
Plastic connectors are lighter, more corrosion-resistant, and cheaper than Brass Connectors. Brass, on the other hand, is more mechanically robust and heat-resistant. For normal garden irrigation, plastic is perfectly sufficient – it is UV-resistant and lasts many years with proper care. Only if you have high pressures (e.g., with a pump) or continuous load in commercial use can brass be the better choice.
Can I leave plastic connectors outside in winter?
Plastic is generally more frost-resistant than metal, but the seals and moving parts (e.g., quick-coupling mechanism) can be damaged by repeated freeze-thaw cycles. It is recommended to remove the connectors before winter and store them dry. If you must leave them outside, protect them from direct moisture and ensure no water freezes inside. Some special frost-proof models are equipped with a drainage mechanism – read the manufacturer's instructions. As a rule: plastic connectors are designed for seasonal use, not for year-round outdoor storage.
More categories in the Connectors area & Accessories
In the parent category Connectors + Accessories you will find everything about hose connections. Depending on the application, different materials or systems may be suitable. Here is an orientation:
If you need permanent, pressure-tight connections – for example for a permanently installed irrigation system – brass connectors are often the more robust choice. Hose clamps help to seal hoses onto connection nipples – indispensable if you are not using a quick coupling. Storz system connectors are the professional solution from the fire service and industrial sectors: they couple with a quarter turn and are suitable for large diameters and high pressures. Plastic hose connectors made of POM also offer a particularly wear-resistant variant made of acetal resin – read the details there.
In brief – The Plastic Connectors category includes 334 items: quick couplings, tees, coupling connectors, and tap connectors made of plastic. They are corrosion-free, lightweight, and available for common hose systems (for example compatible with Gardena, Wolf, Kärcher). Pay attention to hose diameter and thread size (usually 1/2 inch or 3/4 inch). For permanent installations or high pressures, alternatives such as brass connectors or Storz system connectors are available. The IBC adapters shown are examples of practical use in rainwater harvesting and fit into the higher-level category Connectors + Accessories.